Products
![](/static/site/cn/images/img3.jpg)
SC8510
Dual Cell High Efficiency 10-A Forward 2:1 Converter and Reverse 1:2 Charger with Load-Switch Function
Introduce
SC8510 is a 99.5% efficiency, 10-A battery discharging (forward 2:1 conversion) and 4-A charging (reverse 1:2 conversion) solution using a switched capacitor architecture. The switched cap architecture and the integrated FETs are optimized to enable a 50% cycle. SC8510 supports designers to migrate current 1S system to 2S battery configuration in following two ways. As a converter, SC8510 works as a voltage divider and can be inserted between main buck-boost charger VSYS output and other loads working under 1S-equivalent voltage. As an integration of converter and charger, SC8510 can be inserted between 2S Li+ battery pack and main buck charger VBAT output, which helps designers to preserve the downstream power architecture of 1S battery system.SC8510 is also integrated with load-switch function used to cut off system power. It can be configured to implementreset and shipping mode function.
SC8510 adopts 42-pin CSP 2.5mm X 2.9mm package.
Function
● Bi-directional switched capacitor converter
√ Forward 2:1 conversion
√ Reverse 1:2 conversion
● Load switch controller
√ Reset mode
√ Shipping mode
● Dual-phase charger pump
√ 10A output current capability in forward direction
√ 4A output current capability in reverse direction
√ Up to 99.5% efficiency
● 3-way charge pump switch protection
√ V2X_UVLO protection before switch
√ V1X_SCP protection before switch
√ CFLY short protection before switch
● 6-way system protection
√ VAC_OVP
√ V2X_OVP
√ V1X_OVP
√ FWD_OCP
√ RVS_OCP
√ TSHUT
● 2-way system alarm
√ TDIE_100_ALM
√ TDIE_120_ALM
Application
● Smartphones
● Tablet PCs
download