PRODUCT CENTER
SC2154Q
Type-C and Dual DPDM Fast Charge Controller

Introduce

 

SC2154Q is a Type-C and DPDM fast charge controller for automotive fast charge applications. It complies with the latest Type-C standards and supports the proprietary high voltage fast charge protocols with dual DPDM interfaces. It targets for the application with the power delivery up to 27W. SC2154Q minimizes external components by integrating USB PD baseband PHY, Type-C detection, dual DPDM PHYs, VBUS discharging paths, VCONN supply, voltage and current sense, 10-bit high performance ADC, dual 10- bit DACs, NMOS gate driver, I2C interface and protection circuits, which provides cost effective solutions to many applications. SC2154Q supports various protection mechanisms including Over Voltage Protection (OVP), Under Voltage Protection (UVP), Over Current Protection (OCP), Short Circuit Protection (SCP), Over Temperature Protection (OTP), DPDM Over Voltage Protection (DPDM OVP), CC Over Voltage Protection (CCOVP),, VCONN Over Current (VCONN OCP) and VCONN Short Protection (VCONN SCP), so to effectively ensure stable and reliable operation of system. The SC2154Q is available in 32-pin QFN package.

Function

 

●   AEC-Q100
   √ AEC-Q100 Qualified for automotive applications
 
●   USB Type-C Output
   √ Support Type-C DFP/Source role
   √ Comply with the PD3.1 protocol specification
   √ Support SOP’ message to meet the requirement of e-marker application
   √ Integrate VCONN
 
●   USB Type-A Output
   √ Support Apple 2.4A, BC1.2, DCP, CDP, FC2.0, FC3.0, AFC, FCP and other mainstream protocols
   √ Support CDP configuration for data transmission application
 
●   Power Output Control
   √ Wide operation range: 3V to 12V (13.5V tolerant)
   √ Support external resistance to set the maximum output power
   √ Support power limit for over-temperature condition
   √ Power delivery level is as follows
       5V3A 9V3A for 27W applications
       5V3A 9V2.2A for 20W applications
       5V3A 9V2A for 18W applications
 
●   Analog Block
   √ Support FB interface for DCDC output regulation
   √ Dual DACs for CC/CV loop.
   √ 10-bit ADC to monitor the voltage / current / DPDM/ other signals
   √ Integrated high side current sense amplifier
   √ Integrated NMOS gate driver
   √ Integrated VBUS discharging paths
   √ Integrated temperature sense module
 
●   Protections
   √ 13.5V tolerant for CC1 and CC2
   √ 12V tolerant for DP and DM
   √ VIN OVP, VIN UVP
   √ On chip OVP, UVP, SCP, VCONN OVP, VCONN OCP, VCONN SCP, OTP, DPDM OVP, CC OVP
 
●   Package
   √ 32-pin QFN, 4mm x 4mm x 0.75mm

Application

 

●   Car chargers

 

 

Consulting telephone : 4006803188(Business) 021-38067888(Headquarter)
Sales & marketing: sc-sales-service@southchip.com
Human resources: hr-candidate@southchip.com
Complaints & suggestions: complain@southchip.com